Description
The Bowe 310S cuts single and multiple webs having pinfeed hole margins into individual forms. The pinfeed hole margin can be cut off on one side, on both sides, or can remain on the form. A center slitter option allows the forms to be slit in the feed direction of the web forms. Single cut mode will cross-cut the forms apart on or between the perforation lines. Strip cut mode will cross-cut twice, allowing for the complete removal of the perforation between forms.
This Bowe 310S comes with a stacker, model: 5518; Serial number: 50039/01.
Refubished with new belts and new blades
Photos may not be of actual model.
60 day parts warranty
Specifications
• Model: 310-S
• Serial Number: 50356/00
Electrical Requirements:
• Voltage: 230 V +/- 10%
• Single phase alternating current: 50/60 Hz
• Wattage (only cutter): 440 W
• Max. wattage (including connections at the output sockets): 690 W
• Heat emission: 440 J/s
• Fuse protection of the supply circuitry according to DIN VDE 805: 10 A
Sound Rating:
• Sound level (with paper 70 g/m2) according to ISO/DIS 9614: Lw(A) = 87 dB
• Medium sound pressure at a 1m-distance according to DIN EN 27779: Lp(A) = 78.3 dB
Application/Format Range:
• Feed in: 1/6″ or 1/8″ and DIN selectable
• Form height: min. 2″, max. 17″
• To be extended to: min. 1/6″ bzw. 1/8″, max. 30″
• Form width (gross): min. 90 mm, max. 510 mm (gross)
• Form width (net): min. 70 mm (2.76″), max. 470 mm (18.5″)
• Margin Trim: min. 10 mm, max. 25 mm
• Strip cut: min. 1/6″ bzw. 1/8″, max. 9/6″ btw. 9/8″
Width Of Continuous Web:
• Max. without margin trim: 470 mm
• Max. with margin trim: 510 mm (in the case of motorized width adjustment: 450 mm)
• Min. with margin trim: 70 mm
• Margin trim per page according to DIN 9771 (spacing of center lines of pinfeed holes from sheet edge: 6 +/- 0.7 mm): 10 – 25 mm
Paper Weight Basis Weight Per Web:
• Standard cutting device: 40 – 200 g/m2
Basis Weight of a Multiple Set:
• Standard cutting device: 90 – 200 g/m2
Reviews
There are no reviews yet.